Operation and Maintenance of Machinery in Motorships, 2020 Edition

Sale price
$74.95
List price
$89.95
Media:Book
Media Book
SKU 9781856099400
Publisher Witherby Seamanship International
ISBN 9781856099400
Pickup available at 3311 S. Andrews Ave.

Usually ready in 24 hours

View store information

Overview

Many changes have taken place within the marine industry due to the rapid advances in technology, particularly in engine design and shipboard practice. Medium speed engines have become larger and are installed as main propulsion engines in larger ships, particularly passenger ships. These engines are highly rated and can burn high viscosity residual fuels. Slow speed crosshead engines have also changed and tend to be long stroke, uniflow scavenged with a central exhaust valve. While medium speed builders have added larger engines to their range, slow speed manufacturers have produced smaller bore models. Engine builders have also merged to provide a wider range of engines while remaining competitive.

Introduction

Many changes have taken place within the marine industry due to the rapid advances in technology, particularly in engine design and shipboard practice. Medium speed engines have become larger and are installed as main propulsion engines in larger ships, particularly passenger ships. These engines are highly rated and can burn high viscosity residual fuels.

Slow speed crosshead engines have also changed and tend to be long stroke, uniflow scavenged with a central exhaust valve. While medium speed builders have added larger engines to their range, slow speed manufacturers have produced smaller bore models. Engine builders have also merged to provide a wider range of engines while remaining competitive.

This publication provides general guidance for the operation and maintenance of machinery in motorships. Certain aspects are covered in greater detail in other parts of the Marine Engineering Practice series and reference has been made to the relevant titles where appropriate.

While this book is intended to give guidance, reference must also be made to the equipment manufacturer’s operation and maintenance manuals. The chapter on electrical machinery sets out guidelines on electrical maintenance and is of particular importance on ships that do not carry electricians.

Changes to shipboard practice have been required to ensure compliance with the MARPOL Convention concerning pollution prevention and environmental protection. Crew must be aware of the regulations concerning the disposal of wastes, including bilge water, sludge, sewage, garbage and emissions, and these are discussed in Chapter 6.

Content

Acknowledgement

Introduction

1 Machinery Arrangements  

1.1 Choice of Optimum Engine Type

1.2 Layout Diagrams and Load Diagrams

1.2.1 Layout Diagram

1.2.2 Load Diagram

1.3 Propulsion Machinery – Two and Four Stroke Engines

2 Main Propulsion Machinery – Operation and Maintenance  

2.1 General

2.2 Running Gear  

2.2.1 Cylinder Heads

2.2.2 Inlet and Exhaust Valves

2.2.3 Pistons

2.2.4 Cylinder Liners  

2.2.5 Fuel Injectors

2.2.6 Fuel Injection Pumps

2.2.7 Indicator Diagrams  

2.2.8 Bearings

2.2.9 Crankshaft Deflections and Crankcase Inspection

2.2.10 Crankcase Explosions

2.2.11 Bedplates and Frames

2.2.12 Gears and Gearboxes

2.3 Turbochargers and Air Coolers

2.3.1 Turbochargers

2.3.2 Turbocharger Surging  

2.3.3 Turbocharger Deposits and Cleaning

2.3.4 Turbocharger Defects

2.3.5 Air Coolers and Cleaning

2.3.6 Scavenge Fires

2.4 Fuels and Bunkering

2.4.1 Fuels
2.4.2 Bunkering 119

2.5 Preparing for Sea and Arrival in Port

2.5.1 Preparing for Sea

2.5.2 Preparing for Arrival in Port  

2.6 Watchkeeping and UMS Operation  

2.7 Performance and Condition Monitoring

2.7.1 Performance Monitoring

3 Auxiliary Machinery  

3.1 Pumps

3.1.1 Positive Displacement Pumps

3.1.2 Centrifugal Pumps

3.1.3 General Pump Maintenance  

3.2 Centrifugal Separators  

3.3 Heat Exchangers

3.4 Fresh Water Generator

3.5 Refrigerating and Air Conditioning Plant

4 Boilers and Boiler Water Treatment  

4.1 Auxiliary Boilers and Burners  

4.1.1 Boiler Burners

4.2 Exhaust Gas Boilers  

4.2.1 Uptake Fires  

4.3 Boiler Maintenance and Inspection  

4.4 Feed Water Treatment  

4.5 Thermal Fluid Systems  

5 Electrical Machinery

5.1 General  

5.2 AC Motors and Generators  

5.2.1 Faults and Effects  

5.3 Batteries

5.4 Protective Devices  

5.5 Loss of Power  

5.6 Earth Faults  

5.7 Hazardous Area

5.7.1 Maintenance of Electrical Equipment  

5.8 Shore Supply

6 Waste Treatment and Disposal  

6.1 Waste Generation  

6.2 MARPOL Regulations  

6.3 Waste Disposal

6.4 Oily Water Separator Systems  

6.5 Sewage Plant

List of Abbreviations  

Table of Conversions  

Index

Details

Title: Operation and Maintenance of Machinery in Motorships
Series Details: MEP VOLUME 2 PART 18
Number of Pages: 246
Product Code: IT103234
ISBN: ISBN 13: 978-1-85609-940-0
Published Date: September 2020
Book Height: 20 mm
Book Width: 160 mm
Book Spine: 235 mm
Weight: 0.80 kg
Author: N E Chell CEng, FIMarEST

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also like