Overview
WiFi GPS Receiver & GPS Repeater – when you want to know exactly where you are:
- WiFi lets you access GPS data anywhere
- For example on a boat, in a building, tunnel, etc.
- Position accuracy to within 2.5 meters
- Updated location every 1.5 seconds
- Quick & easy to install
Description
Marine GPS Receiver & GPS Repeater
The ideal Marine GPS Receiver & GPS Repeater for helping you keep on track. Using 50 channel ‘all-in-view’ tracking, so you know exactly where you are all the time.
Containing WiFi the QK-A012 will repeat the GPS data – so that up to 5 different devices can access the information up to 12 metres away (in an open air environment).
The QK-A012 is ideal for use both on boats or on land. (for example if you want to access GPS data in a building, caravan, tunnel, etc.)
Features
-
- 50 Channels “All-In-View” Tracking
- Position accuracy of 2.5 meters 2D RMS
- Cold / Warm / Hot Start Time: 26/26/1 seconds
- Reacquisition Time: 1.5 second
- Standard NMEA-0183 output through WiFi and USB
- Support Ad-hoc and Station mode in WiFi
- Two LEDs indicating power and GPS activity
- USB 2.0 powered (<50mA@5.0V)
- Powered SMA connector for 50 Ohm GPS antenna
- The internal WiFi access point connects up to 4 devices simultaneously
- Compatible with Windows 7,8,10,Mac OS X, Linux systems, Android and iOS. Please note, initial configuration may only be performed using a Windows operating system.
How to install
For best results the QK-A012 needs to be connected to an aerial. (Ideally an Active GPS antenna with an SMA male connector)
What’s included?
- 1 x QK-A012
- 1 x USB cable
(Optional) GPS Antenna
Manual / Drivers
Setup Guide
Basic setup overview.
Manual
Detailed technical specifications.
Configuration Software
Please choose the proper configuration tool. 08022020 or later version supports disable WiFi and GPS. 29062020 or later version supports UDP protocol (need supported WiFi firmware).
How do I use configuration software?
Below is our ‘step by step’ guide
