Overview
NMEA 2000 <—> WiFi and USB gateway
Integrated SD card for voyage data logging
- Bi-directional NMEA 2000, WiFi and USB converter
- Recorded data in selectable format: NMEA 0183 or PCDIN(NMEA 2000 raw data)
- Converts the most common NMEA 2000 PGNs to / from NMEA 0183 sentences over WiFi and USB
- Allow diagnosis and performance analysis from a safe and remote place
- Galvanic opto-isolation on NMEA 2000 CAN bus connection
- Access to Quark-cloud free in the first 24 months
- Circular buffer preserves latest recorded data while oldest data overwritten when card is full
- WiFi supports Ad-hoc, station and standby mode
Description
The AS07-C Optional Output Switch is an accessory for the AS07-N2K GPS sensor.
While the AS07-N2K is designed to be used ‘plug and play’, for instant positional data (PGN messages) to all NMEA 2000 connected devices with no need for additional configuration,
This Optional Output Switch (AS07-C ), gives the AS07-N2K the following additional functionality:
- Configurable 1-10 Hz rapid position update rate, through the Windows Configuration tool (if used without AS07-C the default setting is 1Hz, which is the recommended setting for most installations)
- Configurable filtering of data output protocols, through the Windows Configuration tool
- NMEA 0183 compatibility (NMEA 0183 RS-422)
- Default NMEA 0183 baud rate set to 4800bps
- Configurable baud rates (4800 / 9600 / 38400 / 115200 bps) through the Windows Configuration tool
AS07-C Connections
When used with the AS07-C, instead of a NMEA 2000 connection, the AS07-N2K with the AS07-C will have the following connections:
- Power: 12V and GND terminals need to be connected.
- USB: A type B micro USB connection allows for connection to a PC. This connection is used to adjust optional additional settings (see Configuration section).
- NMEA 0183 output: AS07 sends out the GNSS messages via the NMEA 0183-RS422 output at a baud rate of 4800bps as default (Baud rates can be adjusted, see configuration section).
More information can be found in the AS07-N2K manual.
What’s included?
- 1 x QK-AS07-C Output Switch
- 1 x USB cable
Compatible with:
- QK-AS07-N2K NMEA 2000 GPS Sensor
Manual / Drivers
Setup Guide
QK-AS07-N2K and QK-AS07-C Basic setup overview.
Manual
Detailed technical specifications.
Drivers
QK-AS07-C driver is a file that lets the computer know the configurations and specification of the device.
Configuration Software
Configuration software based on Windows system. Allows user to change the output messsages format between NMEA 0183 and NMEA 2000(N2K). It also allows to setup ouput data baud rate, GNSS messages frequency, messages type.
Check the setup guide for more information.
